Knowledge Battery Testing How do depth of discharge (DOD) and ambient temperature impact the cycle life and capacity retention of secondary lithium coin cells during laboratory testing? Discover the key factors for battery testing
Author avatar

Tech Team · Kintek Solution

Updated 3 months ago

How do depth of discharge (DOD) and ambient temperature impact the cycle life and capacity retention of secondary lithium coin cells during laboratory testing? Discover the key factors for battery testing


In laboratory testing, depth of discharge is usually the dominant cycle-life variable: secondary lithium coin cells tested at 5% DOD can reach up to 3,000 cycles, while increasing the cycling depth to 20% can reduce life to approximately 500 cycles. Temperature affects both the capacity measured during a test and the rate of long-term degradation: low temperatures reduce accessible capacity, while elevated temperatures accelerate capacity fade and parasitic reactions.

Shallow cycling substantially extends cycle life, but temperature determines how much capacity is immediately available and how quickly the cell ages. For the evaluated lithium-manganese dioxide coin-cell system, discharge capacity at −20 °C remains approximately 90% of its value at 23 °C, while room-temperature storage produces less than 5% annual capacity loss.

How DOD Controls Cycle Life

Why deeper discharge causes faster degradation

Each cycle exposes the electrodes and electrolyte to chemical and structural changes. As DOD increases, more active material participates in each cycle, increasing the opportunity for parasitic side reactions, electrode stress, and irreversible capacity loss.

The supplementary evidence describes an approximately increasing relationship between capacity loss per cycle and DOD. In practice, the relationship is often strongly nonlinear: reducing DOD can produce a disproportionately large increase in the number of cycles before the cell reaches its failure criterion.

What the 5% and 20% results demonstrate

The reported results provide a clear comparison:

  • 5% DOD: Up to approximately 3,000 cycles
  • 20% DOD: Approximately 500 cycles

The 20% test does not simply use four times as much energy per cycle; it also produces substantially fewer cycles. This illustrates why shallow cycling is valuable when the application can operate within a narrow state-of-charge window.

Cycle count is not the same as energy throughput

A shallow-DOD test naturally records more individual cycles because each cycle transfers less charge. Therefore, cycle count alone is not sufficient for comparing test conditions.

Laboratory reports should also evaluate cumulative ampere-hours, cumulative watt-hours, capacity retention, and degradation per unit of throughput. These metrics distinguish the benefit of shallow cycling from the effect of simply transferring less energy per cycle.

How Temperature Changes Measured Capacity

Low temperature reduces accessible capacity

At low temperature, ionic conductivity decreases and internal impedance rises. The cell may therefore reach its voltage cutoff earlier, making less of its stored charge accessible during the test.

For the evaluated secondary lithium coin cells, operation at −20 °C retains approximately 90% of the discharge capacity measured at 23 °C. This indicates useful low-temperature performance, but it does not mean that the cell experiences no thermal effect.

Measured capacity is not always permanent capacity loss

A reduction in discharge capacity at low temperature can be partly reversible. When the cell returns to a warmer condition, lower impedance and improved transport may restore much of the previously inaccessible capacity.

Test engineers should therefore distinguish between:

  • Reversible rate or temperature limitation: Capacity is temporarily inaccessible.
  • Irreversible degradation: Active material, interfaces, or internal components have permanently deteriorated.

Without temperature-controlled recovery measurements, these two effects can be confused.

Elevated temperature accelerates aging

Higher temperatures generally accelerate parasitic chemical reactions and structural degradation. As a result, cells cycled or stored at elevated temperature typically show a steeper capacity-retention decline than cells maintained near room temperature.

The available reference establishes this trend but does not provide a specific elevated-temperature cycle-life value for the evaluated lithium-manganese dioxide coin cells. Consequently, the temperature effect should be reported as an experimentally measured degradation rate rather than assigned a universal cycle count.

How Temperature and DOD Interact

High DOD at high temperature is a demanding condition

DOD and temperature are not independent stress factors. A deeper discharge increases the amount of electrochemical activity per cycle, while elevated temperature accelerates the reactions associated with degradation.

Testing a cell at both high DOD and high temperature can therefore produce much faster capacity loss than either condition alone. This combination is useful for accelerated aging, but it should not be treated as a direct prediction of normal room-temperature service life without an appropriate correlation model.

Low temperature can distort cycle-life comparisons

At low temperature, increased impedance and earlier voltage cutoff may reduce the measured discharge capacity even when the underlying materials have not permanently degraded. If two DOD conditions are defined from nominal room-temperature capacity, the actual delivered fraction can differ at low temperature.

For reliable comparisons, define DOD consistently and document whether it is based on:

  • Room-temperature rated capacity
  • Capacity measured at the test temperature
  • Charge passed between fixed voltage limits
  • A state-of-charge estimate

The test protocol determines the interpretation

Charge rate, discharge rate, cutoff voltage, rest periods, cycling frequency, and thermal equilibration all influence the result. A DOD-temperature experiment is meaningful only when these variables are controlled or explicitly reported.

What Capacity Retention Means During Storage

Room-temperature storage shows low self-discharge

The evaluated cells retain capacity well under room-temperature storage, with less than 5% capacity loss per year. This supports their use in applications where the cell spends long periods in standby or experiences relatively infrequent cycling.

Storage retention, however, is not equivalent to cycle-life retention. A cell can show low self-discharge during storage while still degrading rapidly when repeatedly cycled at high DOD.

Storage temperature must be reported separately

Storage temperature affects self-discharge and the growth of passivation or reaction layers. Elevated storage temperatures generally increase the rate of capacity loss, while low-temperature storage may change the cell’s immediate impedance and discharge behavior.

A proper storage study should separate capacity measured after thermal equilibration from capacity measured immediately after removal from the storage environment.

Designing a Useful Laboratory Test

Use controlled DOD profiles

Battery cyclers should be programmed with precise charge and discharge limits rather than relying only on elapsed time. A useful test matrix can include shallow, moderate, and deep DOD conditions, such as 5%, 20%, and a deeper reference condition, while holding current rate and cutoff criteria constant.

Pulse-discharge routines can additionally reveal how impedance and recovery behavior change as the cell ages.

Measure more than cycle count

At defined intervals, record:

  • Discharge capacity
  • Charge capacity and coulombic efficiency
  • Voltage profile
  • Energy delivered
  • Internal resistance or impedance
  • Capacity retention relative to the initial baseline
  • Recovery capacity after resting or returning to room temperature

These measurements help separate loss of active capacity from temperature-induced voltage limitation.

Control the thermal environment

Use an environmental chamber or equivalent controlled setup, and allow the cell to reach thermal equilibrium before cycling. Representative points may include −20 °C, room temperature near 23 °C, and elevated temperatures, provided the cell’s safety and operating limits are respected.

The same current, voltage limits, rest periods, and DOD definition should be maintained across temperatures wherever the purpose is direct comparison.

Understanding the Trade-offs

Shallow DOD improves life but reduces usable energy per cycle

Operating at 5% DOD can greatly extend the number of cycles, but the application must tolerate frequent replenishment and a narrow operating window. A design that requires most of the cell’s stored energy in each event cannot obtain the full benefit of shallow cycling.

Low-temperature operation preserves function but may reduce power capability

The reported approximately 90% capacity at −20 °C is strong performance relative to room temperature. Nevertheless, higher impedance at low temperature can reduce voltage stability and pulse-current capability even when the measured capacity remains relatively high.

High-temperature testing is useful but can be misleading

Elevated-temperature testing accelerates degradation and helps identify thermal limits. However, it can change the dominant failure mechanisms, so accelerated results must be interpreted carefully rather than directly converted into field life.

Avoid comparing incompatible test definitions

Cycle counts from different studies are not directly comparable unless they use similar end-of-life criteria, current rates, voltage limits, temperatures, rest periods, and DOD definitions. A statement such as “500 cycles” has limited meaning without those conditions.

How to Apply This to Your Project

Use the following priorities when planning or interpreting secondary lithium coin-cell testing:

  • If your primary focus is maximum cycle life: Use the shallowest practical DOD, because the tested 5% regime achieved up to approximately 3,000 cycles compared with about 500 cycles at 20% DOD.
  • If your primary focus is usable energy per cycle: Test a larger DOD window and quantify cumulative energy throughput, not cycle count alone.
  • If your primary focus is cold-temperature operation: Measure capacity, voltage cutoff behavior, impedance, and recovery after returning to room temperature; do not treat low-temperature capacity loss as automatically permanent.
  • If your primary focus is accelerated aging: Combine controlled elevated-temperature testing with defined DOD levels, while verifying that the resulting failure mechanism represents the intended application.
  • If your primary focus is standby retention: Conduct a separate storage study, since the evaluated cells showed less than 5% annual capacity loss at room temperature.

For defensible results, treat DOD as the main cycle-life control variable and temperature as both a capacity-access and degradation-rate variable.

Summary Table:

Factor Impact on Cycle Life Impact on Capacity Retention
Depth of Discharge (DOD) 5% DOD: up to 3,000 cycles; 20% DOD: ~500 cycles Deeper discharge increases capacity loss per cycle
Low Temperature (−20 °C) Not specified; impedance rise may affect cycling Discharge capacity ~90% of 23 °C, but reversible
Room Temperature (23 °C) Reference point Storage loss <5% per year
Elevated Temperature Accelerates aging and degradation Faster capacity fade; irreversible
DOD & Temperature Interaction High DOD + high temp accelerates degradation Low temp may distort DOD definitions

Optimize your battery testing with KINTEK's advanced coin cell equipment. Maximize cycle life and capacity retention. Contact us today for expert solutions.


Leave Your Message