Knowledge Battery Testing How does aluminum substitution in AB5-type metal hydride alloys improve cycle life and corrosion resistance? Discover key mechanisms
Author avatar

Tech Team · Kintek Solution

Updated 3 months ago

How does aluminum substitution in AB5-type metal hydride alloys improve cycle life and corrosion resistance? Discover key mechanisms


Al substitution improves AB5 electrode durability mainly by stabilizing the alloy surface and limiting hydrogen-induced structural damage. Aluminum forms a relatively protective aluminum-oxide-rich surface film in the alkaline electrolyte, which slows corrosion. At the same time, Al reduces the volume change associated with hydrogen insertion, limiting lattice expansion, pulverization, and the progressive capacity loss that normally shortens cycle life.

Core takeaway: Aluminum improves cycle life through two linked mechanisms: surface passivation reduces corrosion, while smaller hydrogen-induced lattice expansion preserves particle and crystal integrity during repeated charge–discharge cycling.

Why AB5 Alloys Need Elemental Substitution

The limitation of unmodified LaNi5

Pure LaNi5 is attractive because it reversibly absorbs hydrogen, but it is generally unsuitable as a commercial Ni-MH negative-electrode material in its unmodified form.

It can exhibit excessive hydrogen dissociation pressure, rapid capacity loss, and significant corrosion in the alkaline electrolyte used in the battery.

The role of multi-element chemistry

AB5 alloys are therefore commonly modified by substituting elements on the A and B sublattices. Mischmetal can replace part of the lanthanum, while cobalt, manganese, and aluminum can partially replace nickel.

These substitutions adjust the unit-cell volume, hydrogen-site geometry, equilibrium plateau pressure, corrosion behavior, and electrochemical durability.

How Aluminum Improves Corrosion Resistance

Formation of a protective surface layer

Aluminum has a strong affinity for oxygen. During electrode operation, Al contributes to the formation of a stable oxide or hydroxide-rich surface layer.

This layer acts as a partial barrier between the alloy and the alkaline electrolyte. It reduces direct chemical attack on the alloy and slows dissolution of the active metallic constituents.

Lower corrosion during cycling

Repeated hydrogen absorption and desorption continually exposes fresh alloy surface through cracking, deformation, and particle rearrangement.

Because Al promotes a more protective surface condition, less of this newly exposed material is rapidly corroded. The result is better retention of electrochemically active alloy over extended cycling.

Protection is compositional, not simply a coating effect

The improvement does not depend only on an externally applied coating. Aluminum is incorporated into the alloy, allowing Al-containing oxide species to form as the surface evolves during electrode operation.

The effectiveness depends on Al concentration, alloy homogeneity, processing history, and the balance with other substituting elements.

How Aluminum Improves Cycle Life

Smaller hydrogen-induced volume change

Hydrogen insertion expands the AB5 lattice. If this expansion and contraction are large, repeated cycling generates mechanical stress within the alloy particles.

Al substitution reduces the volume change per inserted hydrogen atom, commonly represented as (V_H), and also reduces the overall relative lattice expansion, (\Delta V/V).

Less lattice strain

Lower expansion means that the crystal structure experiences less dimensional distortion during charging. The alloy is therefore less likely to accumulate internal strain, defects, and local structural instability.

This is important because electrode failure is not caused only by chemical corrosion; mechanical damage from repeated hydrogen cycling can also destroy electrochemical performance.

Reduced pulverization

Excessive lattice expansion can cause particles to crack and fragment, a process known as pulverization. Pulverized material may lose electrical contact, develop unstable surfaces, and become more vulnerable to corrosion.

By limiting expansion, Al helps preserve particle cohesion and the conductive network within the electrode.

Slower capacity degradation

Capacity declines when active alloy is lost through corrosion, electrical isolation, or structural breakdown. Aluminum addresses all three pathways indirectly by maintaining a more stable surface and reducing mechanical damage.

The practical result is improved capacity retention and longer electrode cycle life.

The Combined Corrosion–Strain Mechanism

Surface stability and bulk stability reinforce each other

Aluminum’s benefits operate at two different structural levels:

  • At the surface: Al-derived oxide species reduce corrosion.
  • In the bulk lattice: Al reduces hydrogen-induced expansion and mechanical stress.

These mechanisms are complementary. A less-corroded particle still fails if it pulverizes, while a mechanically stable particle still degrades if its surface continuously dissolves.

Why this matters during repeated charge–discharge operation

Each cycle exposes the alloy to both chemical and mechanical stress. Aluminum reduces the severity of both stresses, so the electrode retains more of its original structure and electrochemical activity over time.

This is why Al substitution improves long-term cycling stability, rather than merely changing the initial discharge behavior.

How Aluminum Fits into AB5 Alloy Optimization

Aluminum is part of a broader substitution strategy

Commercially relevant AB5 compositions typically use several substitutions rather than relying on Al alone. Cobalt, manganese, and aluminum can each modify hydrogen thermodynamics, lattice dimensions, catalytic behavior, and corrosion resistance.

The goal is to balance discharge capacity, equilibrium pressure, rate capability, corrosion resistance, and cycle life.

Alloy processing also controls the outcome

The benefits of Al depend on how uniformly it is distributed in the alloy. Controlled melting, rapid cooling, and annealing can help produce a consistent phase composition and reduce local compositional variations.

Poor processing can create chemically different regions that corrode unevenly or respond differently to hydrogen cycling, weakening the advantages expected from the nominal Al content.

Understanding the Trade-offs

Higher durability can involve capacity compromises

Al substitution is not automatically beneficial at any concentration. Changing the alloy composition alters the available hydrogen-storage sites and the alloy’s electrochemical properties.

Excessive substitution may reduce discharge capacity or affect hydrogen absorption and desorption kinetics, so the Al level must be optimized rather than maximized.

A protective oxide can affect surface kinetics

The same surface film that suppresses corrosion can also influence the transfer of hydrogen and charge at the electrode–electrolyte interface.

A highly protective or poorly distributed surface layer may impede reaction kinetics. The desired condition is a stable, controlled passivation layer that limits corrosion without excessively blocking electrochemical reactions.

Composition alone does not determine cycle life

Electrode performance also depends on phase uniformity, particle size, powder consolidation, conductivity, heat treatment, and testing conditions.

Therefore, an Al-containing alloy should be evaluated as a complete electrode formulation, not judged solely by its nominal chemical composition.

Making the Right Choice for Your Goal

Al substitution is most effective when it is treated as a controlled design variable within a multi-element AB5 alloy system.

  • If your primary focus is corrosion resistance: Use Al to promote a protective oxide-rich surface, while optimizing composition and processing to avoid excessive passivation.
  • If your primary focus is cycle life: Favor an Al-containing composition that minimizes (V_H) and (\Delta V/V), thereby reducing lattice strain and particle pulverization.
  • If your primary focus is maximum discharge capacity: Limit Al to an optimized level and evaluate its effect on hydrogen-storage capacity and reaction kinetics rather than assuming more Al is better.
  • If your primary focus is reproducible electrode development: Control melting, cooling, annealing, particle preparation, and powder consolidation so the intended Al distribution and phase structure are actually achieved.

In essence, aluminum extends AB5 electrode life by making the alloy both chemically more resistant and mechanically less vulnerable to repeated hydrogen cycling.

Summary Table:

Mechanism Effect Benefit
Surface oxide formation Protective layer Reduced corrosion
Lower volume change (V_H) Less lattice strain Maintained structure
Reduced pulverization Preserved particle integrity Longer cycle life

Elevate your battery R&D with KINTEK's precision equipment. From slurry mixing to cell assembly, our tools help you optimize advanced materials. Contact us today to see how we can accelerate your research!


Leave Your Message