Constant Temperature Dip Coating Machine

Product Overview

This constant-temperature dip coating system combines programmable withdrawal motion, controlled heating, and timed processing into a compact laboratory platform for repeatable film-coating work. It supports a withdrawal-speed range of 1 mm/min to 200 mm/min, allowing researchers to establish controlled coating conditions for small, flat specimens. The equipment is designed for processes where coating consistency depends on stable movement, defined immersion duration, and managed drying conditions.

The unit is suited to battery-material development, thin-film preparation, ceramics research, surface-treatment studies, and academic materials laboratories. Its specified sample capacity accommodates specimens measuring 75 mm x 25 mm x 2.5 mm, while its effective immersion length of 60 mm supports controlled dip exposure. Programmable immersion and drying times help operators apply consistent cycle settings across experimental batches.

Built for benchtop laboratory deployment, this system operates from AC220V, 50Hz power and requires no water, gas, or ventilation connection. The integrated temperature-controlled enclosure provides a range from room temperature plus 5 to 100 degrees C, with stated temperature fluctuation of plus or minus 1.5 degrees C. These defined operating parameters support reliable use within specified environmental and installation conditions.

Key Features

• Programmable Withdrawal Speed: The equipment provides a selectable lifting-speed range of 1 mm/min to 200 mm/min. This broad adjustment range enables controlled coating trials where withdrawal motion is a defined process variable.

• Constant-Temperature Processing: The system supports a temperature range from room temperature to 100 degrees C, while the temperature-controlled enclosure operates from room temperature plus 5 to 100 degrees C. This capability supports processes requiring controlled thermal conditions during immersion and drying.

• Timed Immersion and Drying Cycles: Immersion and drying time can be set from 1 to 999 seconds. Defined timing gives laboratory teams a repeatable basis for establishing and comparing coating-process conditions.

• Multi-Cycle Lifting Capability: The unit can perform 1 to 20 lifting cycles. This setting allows operators to configure repeated dip-and-lift sequences within the stated operating range.

• Controlled Specimen Handling: The lifting load is rated at no more than 100 g, and the specified sample size is 75 mm x 25 mm x 2.5 mm. These limits provide a clear operating envelope for small substrate preparation and coating trials.

• Effective Immersion Capacity: A 60 mm effective immersion length provides defined positioning capability for the supported specimen format. This is useful when establishing consistent wetted length during process development.

• Laboratory-Ready Electrical Design: Rated at 220V and 850W, the equipment operates from AC220V, 50Hz supply and requires reliable grounding. No water or gas supply is required, simplifying installation in appropriately prepared laboratory spaces.

• Compact Equipment Footprint: The main unit dimensions are 450 mm x 500 mm x 970 mm. The temperature-controlled enclosure has external dimensions of 460 x 510 x 695, supporting practical placement on a suitably rated workbench.

Applications

Technical Specifications

Why Choose This Product

• Defined Process Controls: Adjustable lifting speed, temperature, immersion time, drying time, and cycle count provide a documented operating framework for coating-process development.

• Stable Thermal Specification: The temperature-controlled enclosure is specified for room temperature plus 5 to 100 degrees C with plus or minus 1.5 degrees C temperature fluctuation, supporting controlled laboratory use within its stated range.

• Practical Laboratory Installation: No water, gas, or ventilation supply is required. With an AC220V, 50Hz grounded electrical connection and a suitable workbench, the equipment can be installed according to its defined site requirements.

• Clear Operating Limits: Specified specimen dimensions, effective immersion length, and lifting-load capacity help procurement and laboratory teams assess fit before deployment.

• Research-Focused Flexibility: The combination of adjustable motion, timed stages, thermal control, and up to 20 lifting cycles supports experimental programs that require controlled parameter changes between tests.

Contact KINTEK for a quote or a custom solution matched to your laboratory coating workflow and installation requirements.

Trusted by Industry Leaders