200mm Pneumatic Battery Edge Folding Machine for Laboratory Use

Product Overview

This pneumatic edge folding machine is designed for forming the folded edge of aluminum-plastic film after trimming in pouch lithium battery production. Its 200 mm folding blade supports a compact, controlled folding operation for laboratory-scale cell fabrication. Adjustable folding width allows the equipment to accommodate cell-specific edge-forming requirements while maintaining a practical footprint for research and process-development environments.

The unit is intended for lithium battery laboratories, battery R&D lines, pilot-scale pouch-cell preparation, and advanced materials research where trimmed aluminum-plastic film must be folded before subsequent assembly steps. It supports process teams that require a dedicated, repeatable forming station instead of a manual folding method, helping organize the pouch-cell workflow around defined pneumatic and speed settings.

Built around a profile frame and painted enclosure panels, this system combines a refined, compact structure with pedal-actuated operation. The operating arrangement is designed for reliable, convenient, and rapid use. Routine cleaning, lubrication, corrosion protection during idle periods, and fastener inspection help preserve smooth motion and dependable performance under regular laboratory operating conditions.

Key Features

• Adjustable Folding Width: The folding width can be adjusted according to battery requirements. This enables the equipment to support pouch-cell edge-forming processes with differing dimensional needs without changing the core operating method.

• 200 mm Folding Blade: A 200 mm folding blade provides the forming length required for the specified operation. The effective folding width is greater than 1 mm, supporting controlled edge formation after aluminum-plastic film trimming.

• Configurable Pneumatic Process Settings: Air pressure can be set and adjusted according to process requirements within the specified pneumatic supply range. This gives process personnel a direct way to align operation with the needs of the folding task.

• Adjustable Operating Speed: Operating speed is configurable based on process requirements, with a working rate of approximately 300 cycles per hour. This supports a measured laboratory workflow while allowing the cycle setting to be matched to the required forming process.

• Foot Pedal Actuation: A foot-operated switch provides a reliable, convenient, and quick means of running the equipment. This arrangement keeps operation direct at the workstation and supports practical handling during repetitive pouch-cell preparation.

• Compact Industrial Construction: The frame is assembled from profiles and painted sealing panels, producing a compact, refined machine structure. The equipment is suited to laboratory placement where usable floor or bench-side space must be managed carefully.

• Serviceable Motion Components: The upper and lower folding blades can be wiped regularly, while moving parts can be lubricated to keep movement smooth. Clear maintenance actions support long-term mechanical consistency and help operators protect the forming mechanism.

• Idle-Period Corrosion Protection: When the equipment is not used for an extended time, blade surfaces can be cleaned and protected with rust-preventive oil. This practical requirement helps preserve blade condition between projects or production campaigns.

Applications

Technical Specifications

The stated specifications define the available forming length, adjustable process settings, utility requirements, physical dimensions, and maintenance requirements for the equipment. Buyers can use these values to assess fit with their laboratory electrical supply, compressed-air infrastructure, pouch-cell dimensions, workstation space, and established maintenance procedures.

The folding-width adjustment is intended to follow battery requirements, while pneumatic pressure and speed are set according to the process requirement. For procurement review, these adjustable factors should be considered alongside the required folded-edge geometry and the available air source of 0.5 MPa to 0.8 MPa. The effective folding width requirement is greater than 1 mm, and the folding blade length is 200 mm.

The AC220V/50Hz, 100 W electrical requirement and L320W300H420mm machine dimensions provide the core installation values for laboratory planning. The compact structure is particularly relevant where the folding station must be positioned close to trimming, assembly, or other pouch-cell preparation operations. Confirm that the intended installation location provides the specified electrical supply and compressed-air range before commissioning.

Maintaining the folding blades and moving components is part of preserving forming quality and machine operation. Frequent wiping of the upper and lower folding blades keeps the blade surfaces clean. Lubricating moving portions helps maintain smooth motion. For extended periods without use, cleaning the folding blade surfaces and applying rust-preventive oil provides surface protection. Regular inspection of screws, nuts, pins, and related fasteners helps identify loosening before it affects equipment quality or operating safety.

Why Choose This Product

• Purpose-Built Pouch-Cell Forming: The equipment is specifically intended for folding aluminum-plastic film edges after trimming in pouch lithium battery work, giving laboratories a dedicated solution for this process stage.

• Process-Focused Adjustability: Folding width, pneumatic pressure, and speed can be adjusted according to battery and process requirements. This provides useful operating flexibility while retaining a straightforward, defined machine function.

• Practical Laboratory Throughput: A working speed of approximately 300 cycles per hour and foot pedal actuation support a responsive workflow for R&D, pilot fabrication, and repeatable prototype preparation.

• Compact, Maintainable Build: The profile-frame and painted-panel construction delivers a small, refined equipment format. Straightforward cleaning, lubrication, corrosion-protection, and fastener-check procedures support long-term operational consistency.

• Clear Installation Requirements: Defined electrical, pneumatic, blade-length, effective-width, and dimension data simplify technical evaluation by procurement and facilities teams before purchase.

Contact us for a quote or a custom solution aligned with your pouch-cell folding process, laboratory utilities, and production requirements.

Trusted by Industry Leaders