Conical Barrel Mixer for Dry Powder and Granule Blending

Product Overview

This conical barrel mixer is designed for blending dry powders and granular materials with consistent distribution throughout the batch. Its conical barrel geometry supports thorough material movement, helping reduce dead zones and improve mixing uniformity. The compact unit combines practical operation with an enclosed stainless steel mixing container, making it suitable for controlled laboratory and small-batch processing environments.

The equipment serves pharmaceutical, chemical, food, feed, ceramic, and metallurgical applications. It is appropriate for research preparation, formulation trials, material development, and production support where dry ingredients or granules must be blended efficiently. A working capacity of 7.5 L and a rated loading capacity of 5 kg provide a useful balance between batch size and space efficiency.

The stainless steel barrel has a smooth internal wall that is easy to clean, while the enclosed construction helps maintain a contained mixing environment. Adjustable mixing speed from 0 to 34 r/min and a selectable mixing time support repeatable process setup across different material combinations. The resulting configuration is practical for demanding users who value consistent handling, straightforward operation, and efficient routine cleaning.

Key Features

• Conical Barrel Mixing Geometry: The conical container promotes material movement through the full batch, supporting uniform blending and minimizing areas where dry powder or granules can remain unmixed.

• Efficient Dead-Zone-Free Mixing: The design is intended to provide effective contact between materials throughout the barrel, helping improve batch consistency without relying on complex internal structures.

• Stainless Steel Construction: The barrel is manufactured from stainless steel, providing a cleanable material-contact surface suitable for applications across pharmaceutical, food, chemical, ceramic, feed, and metallurgical processing.

• Smooth Internal Wall: A polished, smooth inner surface simplifies residue removal after processing. This is especially useful when the equipment is used for repeated trials or when different formulations are processed in succession.

• Adjustable Mixing Speed: The speed can be regulated from 0 to 34 r/min, allowing operators to establish an appropriate mixing condition for different dry powders and granular materials within the unit's operating range.

• Timed Mixing Operation: Mixing time can be set for a standard process cycle. The reference operating time is 6 to 8 minutes, providing a practical starting range for routine batch preparation.

• Enclosed Mixing Environment: The barrel offers good sealing performance, helping keep the material contained during operation and supporting a cleaner working area.

• Compact Laboratory Footprint: Measuring 480 × 380 × 680 mm, the unit is suited to laboratories, pilot areas, and production support spaces where usable capacity must be combined with limited installation space.

Applications

Technical Specifications

The 15 L barrel volume defines the total container capacity, while the 7.5 L working volume identifies the available operating volume for material processing. The specified loading capacity is 5 kg. These values should be considered together when planning a batch, particularly when material bulk density varies between formulations.

The mixing cycle reference is 6 to 8 minutes, and the speed range is 0 to 34 r/min. Operators can use these controls to establish a repeatable setup for the selected dry powder or granular material. Actual process optimization should be determined through application testing because material flow, particle size, moisture, and formulation composition can affect the required mixing condition. Those material properties are not defined in the available product references.

The 0.06 kW motor is matched to the compact mixing configuration. The overall dimensions of 480 × 380 × 680 mm allow the unit to be considered where bench-adjacent or compact floor placement is required. At 19 kg, the complete machine has a manageable format for laboratory and small-batch processing areas, subject to the user's installation and handling procedures.

Why Choose This Product

• Purpose-Built for Dry Materials: The conical barrel configuration is specifically suited to dry powders and granular materials, giving buyers a focused solution for blending tasks across several industrial and research sectors.

• Consistent Process Setup: Adjustable speed and a defined 6 to 8 minute mixing reference make it easier to establish repeatable operating procedures for routine batches and development work.

• Practical Hygienic Design: Stainless steel construction, good sealing performance, and a smooth internal wall support clean operation and efficient changeover between material batches.

• Efficient Use of Space: The 7.5 L working volume, 5 kg loading capacity, and compact 480 × 380 × 680 mm dimensions provide useful small-batch capability without requiring a large installation area.

• Broad Industrial Versatility: One unit can support powder and granule preparation in pharmaceutical, chemical, food, feed, ceramic, metallurgical, academic, and advanced materials environments.

Contact us for a quotation and application-specific guidance on configuring this conical barrel mixer for your dry powder or granular material workflow.

Trusted by Industry Leaders