Laboratory Hydraulic Hot Press for Solid-State Battery Research and Manufacturing

Introduction

The MY08 Laboratory Hydraulic Hot Press Machine is designed to support high-precision thermal pressing applications in advanced materials research. It is particularly suited for solid-state battery electrolyte preparation, composite material lamination, and polymer component processing. Operating on a hydraulic upward-pressing configuration, the system combines dual-plate independent temperature control with programmable pressure profiling to assist researchers in achieving consistent and reproducible experimental results.

Key Features

• Dual-Plate Programmable Heating: The upper and lower $500 \times 500\text{ mm}$ heating plates are independently controlled, allowing for uniform heat distribution or the creation of precise thermal gradients across the specimen.
• Programmable Pressure & Dwell Cycles: Users can configure multi-step pressing profiles, including automated pressure ramping, holding times, and venting phases, to accommodate sensitive chemical structures and phase transitions.
• Upward-Pressing Hydraulic Mechanism: Force is applied from the bottom upward, ensuring stable alignment and a steady load distribution across the platens.
• Intuitive Touchscreen Interface: A 7-inch color touchscreen controller provides real-time monitoring of temperature curves, pressure levels, and cycle times.
• Integrated Protective Enclosure: Equipped with a safety door and an automatic stop mechanism that immediately pauses operation and halts pressure generation if the workspace is accessed during a cycle.

Technical Specifications

Target Applications

• Solid-State Electrolyte Synthesis: Consolidating ceramic, polymer, or sulfide-based electrolyte membranes under controlled thermal and mechanical loads to minimize interfacial resistance.
• Electrode and Membrane Assembly: Compressing catalyst-coated membranes (CCMs) and gas diffusion layers for fuel cell research without damaging delicate microstructures.
• Polymer and Composite Lamination: Curing thermosets, shaping thermoplastic prepregs, and laminating multilayer functional sheets for academic material testing.
• Pharmaceutical and Powder Compaction: Pressing raw active pharmaceutical ingredients (APIs) or biocompatible polymers into defined shapes for dissolution or physical characterization.

Customization Options

To accommodate diverse laboratory layouts and unique experimental requirements, customized configurations are available:

• Hardware Modifications: Platen sizes, maximum daylight spacing, and cooling channels (air or water cooling) can be adjusted to fit specific experimental vessels or mold geometries.
• Software and Integration: Programmable logic controllers (PLCs) can be customized with specific communication protocols, data-logging capabilities, or custom user interfaces to integrate into centralized laboratory information management systems (LIMS).

Safety and Compliance Standards

The MY08 hot press is built to comply with industrial safety standards, ensuring a secure environment for laboratory personnel.

• CE Certification: The equipment is compliant with the relevant European Union health, safety, and environmental protection directives.
• Fail-Safe Interlocks: Physical safety doors isolate the high-temperature and high-pressure zones during operation. Opening the protective door automatically interrupts the power cycle and halts the hydraulic system, reducing the risk of accidental exposure to heated surfaces or mechanical movement.

Trusted by Industry Leaders